I designed and printed this bookstand which can be mounted on a piano lid, as our piano was lacking one. The mounting part is specific for my piano, so check before you print ;)<div>The design was made using Fusion 360. Printed on an Ultimaker Original+ using colorFabb Woodfill Fine. I used this as entry to the 2015 colorFabb Time-lapse contest. It took about 44 hours in total to print.</div><div><br></div><div>The separate parts must be mounted togethers using M3 nuts and bolts.
Used printer settings: </div><div>* temperature: 200 C </div><div>* fill: 30% </div><div>* bed temperature 50 C </div><div>* Speed: 100 for the top and bottom parts, and 150 mm/s for the middle part. </div><div><br></div><div>See <a rel="nofollow" target="_blank" href="https://youtu.be/vSgKZPUul0E">https://youtu.be/vSgKZPUul0E</a></div>
Creative Commons Attribution Noncommercial Share Alike