Pointer Trowel

A pointer trowel is used in masonry to fill in joints. It has an angled and pointed end to get mortar into tight spaces.


Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


A successful print without support material took approximately 2 hours with a print speed of 65 mm/s and used approximately 40g of PLA. The trowel was printed with an infill density of 35% and a total wall thickness of 3mm to keep the handle strong. The handle was designed at the angle it is because it is at an angle that is still comfortable to use and it can print freely without support material. By printing without support material on the handle, the print quality is decreased on the underside of the handle in comparison to the rest of the print.



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


0a05bf16afec7d907938f1f6561569cc?default=blank&size=40agbretz published this design ago