Thanks for downloading!
We'd love to hear from you if the print was successful.
Pond Plant Base
Pond Plant BaseFor your home
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
If your pond plants keep falling over due to heavy wind, then this model is the solution! The base is designed for square planters that are 90mm square at the bottom, and 95mm square at a height of 60mm (scale the model according you your planter size).
Due to the use case of this model, you can print it at large layer heights with low infill percentage. For me, the print took just under 2 hours. Once printed, simply click the two halves together. The clearances of the model should result in a nice fit between the two parts.
If you want to support me for the designs I publish for free, please consider using my
AliExpress Affiliate Link (https://bit.ly/2XYWpHW) when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)
Materials and methods
Since this print will be used underwater, I assume the PLA will hold up for quite some time. If you're unsure about the durability of PLA, you can print it in something more durable and temperature resistant, like Prusament ASA (which is also UV stable).
Issues are used to track todos, bugs or requests. To get started, you could create an issue.