Thanks for downloading!
We'd love to hear from you if the print was successful.
Printrbot Hot End Fan
These are the STLs you will need to install our 30mm hot end fans3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
These are the STLs you will need to install our 30mm fans to our hot ends. Please download the correct STL for which printer you own (Play, Simple, Plus). These will fit our Ubis 13S Hot End.
There are two versions of this fan shroud, with or without LED mounting capabilities. Do you want to illuminate your 3D printing? Then purchase our LED board and download/print the LED version.
If you need to purchase the 30mm blower fan you can find it on our site - https://printrbot.com/shop/fan/.
If you need to purchase the Ubis 13S Hot End you can find it on our site - https://printrbot.com/shop/ubis-13-s-hot-end/.
We designed these files in Fusion360. You can find and alter/improve these files here -
Happy Printing from Team PB!
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Printed for my Play with an UBIS 13. It ended up pushing the auto-leveling probe slightly, causing the nozzle tip to dig into the plate during homing. Sanding off about a mm on that side fixed the problem.
What is the suggested Fill Density for printing this fan mount using PLA?
It sure is compatible with the Metal Simple. We have one mounted on each of the Simple, Play, and Plus in our shop.
you tagged this for the metal simple, is it really compatible>