Thanks for downloading!
We'd love to hear from you if the print was successful.
Printrbot Play Components
These are the components you will need to print to complete your Maker to Play Upgrade kit.3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
If you purchased the Maker to Play Upgrade kit from Printrbot.com, you will need to print these components to complete you upgrade build. Be sure to print with 100% infill so the components come out as solid objects.
The quantities you will need to print of each are;
4 - Z Axis Rod End
1 - Sensor Clamp
7 - Universal Bearing Clamp
1 - X Axis Bearing Clamp
4 - X Axis Rod Clamp
1 - Y Axis Rod End Front
1 - Y Axis Rod End Back
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
- Printed on:
- Printrbot - Printrbot Simple
- Works great, perfect replacement
- Works better when you orient the part so that the Z-lines are parallel to the threads on the Z-sensor. In its default position in Cura the part is weak and my first version snapped.
Will it fit if you turn it on an angle?
- Printed on:
- Printrbot - Assembled Printrbot PLUS
- 200Micron 50mm/s Proto-Pasta 190C Hot End 70C Bed Sliced in Cura
Assuming most users will be printing these components on their Printrbot Simple 1405 before disassembling it, does anybody have any idea of how we're supposed to print the Y-Axis Rod Ends? Both appear to be too long to fit on the default buildplate of a Simple Makers? Is there a way to resize it? Is it expected that we would have another printer? Or are we supposed to have it printed by somebody else?
I actually 'pre-threaded' the ends before assembling them. They need to be a tight fit and it worked out easier to do it 'off printer'