Thanks for downloading!
We'd love to hear from you if the print was successful.
Printrbot Play Integrated Fan Mounting Frame
The original Printrbot Play metal fan mounting frame is good but not convenience especially thr cover blocks the extruder and the hot end that you cannot watch the funny printing process. This integrated fan mounting frame can replace the metal one with the following features: 1. One piece design,
3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
100% printable by Printrbot Play 2. Relocate both the upper and lower fan to have better efficiency. 3. Move the lower fan at side with integrated shroud 4. Opening for the extruder and hot end 5. Opening for the tension adjusting screw of the extrunder 6. LED Lighting at the extruder and hot end
tip, the LED power can be connected to the upper fan Have fun!
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
mroreo123 added this to the Printrbot Play Partz collection ago
clownbrother added this to the Printrbot play collection ago
__Vincent__ printed this ago
- Printed on:
- Ultimaker - The Ultimaker 2
- Result:
- Good part, tolerances well done and not too tight. Fits well on the Play.
- Feedback:
- Fan cable routing should be better detailed as this can be challenging. Now have a clearer access for the extruder but I lost the ability to put my other finger on the bottom of the metal shroud when pushing the lever. Will have to find another position. Thanks a lot for the design, this is great otherwise! So nice to see the build area now,
Almond Lee commented agoHi all, a new version has just been posted as the link. Have funs!
https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame-plus-diy-fan-guard
Ben Silber commented agoI remixed this design a little myself so I could fit a different fan cover on the bottom fan. I also removed some more material from the front for more visibility! I loved this design though so I knew I had to use it as my base: https://www.youmagine.com/designs/printrbot-play-full-fan-shroud
cacomistle added this to the 3d-printer collection ago
kitbash added this to the printrbot play collection ago
倩ι added this to the Printrbot Play collection agoAlmond Lee published this design ago