Thanks for downloading!
We'd love to hear from you if the print was successful.
Prism
These are calibration 3-D model STLs used for the study 360 Degree Real-time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views.
Other
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Attribution
http://www.mdpi.com/2504-4494/1/1/2
Description
These are calibration 3-D model STLs used for the study 360 Degree Real-time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views.
In addition, the STL and SCAD code is given for a first generation 3d printable design to attach the cameras to the MOST delta.
Models used for the following paper: Nuchitprasitchai, S., Roggemann, M. & Pearce, J.M. Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views. J. Manuf. Mater. Process. 2017, 1(1), 2; open access
http://www.mdpi.com/2504-4494/1/1/2
other 3-D models are here:
https://osf.io/utp6g/
Materials and methods
printied by MOST Delta printer http://www.appropedia.org/Athena_Build_Overview
- PLA 1.75 mm Hatchbox
- Fill Density 100%
- print speed 60 (mm/s)
- Layer height 0.2 (mm)
- shell and bottom/top thickness 1 (mm)
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.