Issue Europe ISO838 Laser cutting template has incorrect hole spacing #16

jam3zs opened this issue on April 22, 2020 11:11

As title.
The 80mm hole pitch is correct between the left and right sets of holes but the pitch in the middle two holes should be less than that. (somewhere around 68mm maybe?)

    Comments

    Eb4f78644a9d49d7fde37d53a6682ab8?default=blank&size=40Benjamin Mondon commented ago

    I've make my own template shield and with 79mm between hole gives better attachement of the visor. And you're right with a spacing of 68mm between the 2 middle holes it fit well !

    Eb4f78644a9d49d7fde37d53a6682ab8?default=blank&size=40Benjamin Mondon commented ago

    Same problem for me... :(

    E3c8f45774254fc859f99327fd07b71f?default=blank&size=40jam3zs created this issue ago

    Back to Protective Visor by 3DVerkstan