Thanks for downloading!
We'd love to hear from you if the print was successful.
Prusa LCD Dovetail Mount for Lack Enclosure
Prusa LCD Dovetail Mount for Lack Enclosure3D printer parts and enhancements
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
These simple dovetail mounts allow you to place the LCD and SD card reader from a Prusa i3 MK3S(+) outside an Ikea LACK enclosure. You will need some longer cables (I ordered two 80cm 10 pin LCD cables from AliExpress) to make this work. I've had no issues with the longer length cables (80cm), so I would not worry about that.
I would suggest printing some shorter LCD legs first, as the display will otherwise stick out a lot.
I've included a drill template in the .STL file that can be used to accurately (pre-) drill (or center punch) your holes.
If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link: https://bit.ly/2LPMNMh when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)
Materials and methods
Depending on your 3D printer, the tolerances might be a little tight. Some sanding/post-processing might be required.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.