Raise3D N2 - Pro2 Style Fan Upgrade [Mk2]

Pro2 Style Fan Mount Upgrade for Raise3D N2

You can adapt, share or use this work commercially as long as you attribute the creator.

Print:

1no. Pro2 Style Duct LHS
1no. Pro2 Style Duct RHS
2 no. Fan Cover

Additionally Requires:

4no. M3 x 10mm Socket Head Screws
4no. M3 x 18mm Socket Head Screws

M3 tap on each angled face for fan through-bolts (2x per duct)

Some light sanding may be required

No longer requires rerouting of stock fan wiring.

Post-Printing:

M3 tap on each angled face for fan through-bolts (2x per duct) Some light sanding may be required.

*This has been migrated from my Thingiverse (RIP): https://www.thingiverse.com/thing:3438703

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

ElliotThompson published this design about 3 years ago