Raspberry Pi 4 Fan Mount **Backward Compatible!**

Cooling fan mount for Raspberry Pi 4, 3


Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


As many know, the Raspberry Pi 4 can struggle with high CPU temps and overheating. I've designed a simple fan mount to attach a 30mm fan to your Pi to help cool it! There are a few versions with 2 or 3 screw mounts. There are versions to accept m2 (or #2 machine screw) and m2.5 for the board-mount screws. The fan screw holes are all m3. You'll need a 3v or 5vDC 30mm fan as well. We just had the fan wired directly to 5V and GND but you can write (or find online) a script that will control fan speed based on the CPU temperature.

To connect the fan to the headers, I soldered breakaway female headers with 0.1" (2.54mm) spacing to the fan wires and plugged them in. Make sure you use the correct pins and note the polarity!

See fan options here



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


8637edb3ff2e1e900930d6e67c00bf5b?default=blank&size=40meie1kyl published this design ago