Thanks for downloading!
We'd love to hear from you if the print was successful.
Raspberry Pi 2 and B+ case
Minimalist case for the new Raspberry Pi 2 and B+ version. All connectors are easily accessible and the GPIO opening is breakable. Hold it together with 4 M2X10 screw.
3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
-Easy access to every connector
-Breakable GPIO opening
-Internal mounting holes (4x M2x10)
-Micro SD card does not protrude but still accessible
-Light guide
Raspberry Pi 2 and B+ version has enough power to run a wifi usb stick, 3d printer and logitech camera without another powered usb hub. Reduce the amount of wires around an OctoPrint setup.
Printed with a Solid Utopia V2 at 0.150mm layer height, 100/120mm/s
Enjoy!
Normand
Materials and methods
4 M2x10 screw
Documents
Edit in 3dslash
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
Peasndcarrots added this to the Octoprint collection ago
greenkutz added this to the YM Colection collection ago
antonio Di Leo added this to the to make collection ago
Lucian Moreira Fazolo added this to the Ale Leg collection ago
georgepi added this to the Raspberry Pi collection ago
ltmhenrique added this to the Tecno collection ago
Roger Hache added this to the roger collection ago
JLD added this to the Raspberry Pi collection ago
mikedeklerk commented agoFits perfectly, or maybe just a bit too tight as I needed to push the Pi in the bottmo case with some force. But don't get me wrong. I love the design. Very precise. Beautifully done with the SD card slot. Many thanks!
Bjørn Lien added this to the Raspberry pi collection ago
Lachlan Fairbank added this to the Stuff to Print collection ago
DjoN added this to the Raspberry Pii collection ago
Anton Roslund added this to the Things I've Made collection agoAnton Roslund added this to the Raspberry Pi collection ago
sbo printed this ago
- Printed on:
- Prusa i3
Matt LaRussa added this to the Raspberry Pi collection ago
Jarrett Trezzo added this to the Things collection ago
Shankman printed this ago
- Printed on:
- prusa Mendel
stenen printed this ago
- Printed on:
- lulzbot mini
- Result:
- Excellent result, although as this was my first-ever attempt at printing with ABS (I also printed this with HIPS earlier on) the casing - especially the cylindrical screw mounts - was a bit brittle. As a first print though, I was really pleasantly surprised.
- Feedback:
- One way to perhaps improve on this really nicely thought-out design is to add an indentation/extrusion on the top/bottom casings respectively, so that the top slides into the bottom, locking it slightly into place.
Anders Pamdal added this to the Att göra collection ago
Antony AUFFRET added this to the raspi collection ago
MesV added this to the Raspberry Pi & Arduino collection ago
Devon Kearns added this to the Organization collection ago
Bjarte Odin Kvamme added this to the Stuff for the future! collection ago
isabel lorite added this to the camara collection ago
3DPrinterOS printed this ago
- Printed on:
- Makerbot - MakerBot Replicator 2
- Feedback:
- Printed at 180 Microns via 3DPrinterOS on the Replicator 2. Fit a bit snug at top but overall worked and looked good!
3DPrinterOS printed this ago
- Printed on:
- Makerbot - MakerBot Replicator 2
- Feedback:
- Printed at 180 Microns via 3DPrinterOS on the Replicator 2. Fit a bit snug at top but overall worked and looked good!
benengel printed this ago
- Printed on:
- Prusa Mendel i2
- Result:
- Slight lifting on the bed. Normally I print with a brim but I opted not to on this. The wall next to the USB and ethernet connectors was very thin and I gave it a couple of post print drops of super glue to keep it from being too flimsy. I printed the no-logo option. I like the simplicity of it.
- Feedback:
- Very nice and simple case. I like that the GPIO is a breakout section.
Normand Bourdage published this design ago