Thanks for downloading!
We'd love to hear from you if the print was successful.
Ratchet Spanner for 13mm Nylock Nuts
Ratchet spanner for tight or nylock nuts.
Maker/DIY
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
Nut size 13mm. Depending on the middle part material, depends on the amount of reverse resistance.. also some light lubrication can help (i use silicone lube spray). The two halves can be glued with superglue take care of the direction of the ratchet parts. The Full spanner outer part can be printed (with supports) as one piece and care taken not to break the vanes when inserting the middle part
Materials and methods
I used PETG for the middle piece because of its flexability.. maybe better in nylon.. trial and error. It's a very easy design and print time is not much more than 1 hour.
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.