It's a little house building for an architecture contest.


Creative Commons Attribution Noncommercial No Derivatives

Commercial use is not allowed nor can you remix or change this work & you have to attribute the creator.

Learn more or download attribution tags


This is a team project made with Rémy Boulud for the 2015 Bénéteau contest. The project was made on ArchiCAD and then modified on sketch’up to be 3d printed.

The project is an autonomous prefabricated and movable tiny building of 20 square meters. It is inspired from Lavoisier’s quote "Nothing is lost, everything is transformed".

You can find more informations about this projet on our respectives websites :

Rémy Boulud : http://remyboulud.wixsite.com/portfolioarchitecte
Romain Dechavanne : http://dechavanne.me

Materials and methods

By default, on Cura, the model will be in the 1/100 scale which was enough to have a good result on my ultimaker 2. It can also be printed bigger.

Print the building and the roof with 20% infill (maybe less is possible?) with supports at only 5% density (it can be a little bit more for the roof). To make the supports easier to remove, the Z distance can be set to 0.15 mm.

Print the curtain wall and the table without any support.

The file "Rutonome full" is not meant to be 3d printed



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


A64b01ebf9e0b566eea7b41f41b884c9?default=blank&size=40Frances Hampton added this to the House collection ago
Mini photo romainManoir01 published this design ago