Thanks for downloading!
We'd love to hear from you if the print was successful.
Rigidbot e3d v6 mount v2 (updated -- now V3)
Update: (Adds BL-Touch mount) This e3d v6 mount replaces the single extruder or rightmost (dual) extruder hot end original equipment on the Rigidbot. The salient feature is essentially zero Z build height loss. Reuses five bolts from original RB extruder hot end. (updated)3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Use two long Rigidbot extruder 45x3mm bolts to mount the root stand to the aluminum plate. Use one RB 25x3mm bolt to mount the clamp to the root and through the root to the stepper. Use 11x3mm bolt to mount the clamp to the root. Use one 11x3mm bolt to mount the root to the stepper. Use two e3d fan screws to hold the fan onto the clamp face.
STL, DesignSpark Mechanical (original), and Sketchup export formats provided.
(Update reduces bolt head countersink depth. Adds space for guide tube collet at top. Changes units to millimeters rather than meters. V3 adds BL-Touch mount. Probe tip is 0.25" x 1.5" offset from hotend tip. For ABS I print 103% scale.)
Materials and methods
-2 45x3mm hex head bolts (reuse RB)
-1 25x3mm hex head bolt (reuse RB)
-2 11x3mm hex head bolts (reuse RB.)
Issues are used to track todos, bugs or requests. To get started, you could create an issue.