We are preparing your download, please wait.
Roll-keeping phone table for toilet walls
You use your smartphone in your toilet? But no place to lay it down? 3Dprint this table!Maker/DIY
A free software license that requires that all work based on this must also be free software as in freely remixable and sharable by anyone under the same license but may be used commercially.
Screw this table tightly enough on the wall of your toilet.
Never put your weight on it.
Use screws and anchors for gypsum boards, if needed.
Fillet width of the top table of RightOpenSquare.stl is 0.9 mm.
That for LeftOpen.stl and RightOpen.stl is 5.0 mm.
roll.FCStd is FreeCAD source.
MD5 (LeftOpen.stl) = 6585f2aa7bb1954bfabfb29d5dbe3c8d
MD5 (RightOpen.stl) = 000c6c64b81db900afcbafbbb7ab35a0
MD5 (RightOpenSquare.stl) = 5f1e753e6d6244b7e15525f45c37b6e5
MD5 (roll.FCStd) = a104793588c53029da886c7a71d15e1e
Materials and methods
Filament required: over 200 g
Layer Height: 0.15 mm (normal)
Support material: No
Build Plate Adhesion: Skirt
ETA: over 20 hours
Issues are used to track todos, bugs or requests. To get started, you could create an issue.