Thanks for downloading!
We'd love to hear from you if the print was successful. If you like the design, please consider donating to the designer.
Donate to Florian L.RotaTable - 3D Scanning Platform
RotaTable is a rotating platform for 3D scanning with Kinect, David3D, or Laser-Line-Scanners. It can also be used as a simple rotating display stand or adapted to be used for photogrammetry.
Maker/DIY
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
RotaTable is a rotating platform for 3D scanning with Kinect, David3D, or Laser-Line-Scanners. It can also be used as a simple rotating display stand or adapted to be used for photogrammetry.
The Firmware for controlling the plate together with David 3D is available at https://github.com/fluetke/RotaTable
Feel free to improve and adjust it.
Materials and methods
- 60x30x0.4cm sheet of poplar plywood
- 60x30x0.5cm sheet of MDF
- stepper motor
- stepper motor driver
- 12V/2A DC powersupply
- 40-42x10mm steel balls
- 20xM3 10mm screws
- 30xM3 16mm screws
- 60xM3 nuts
- 4xM2.5 25mm screws
- 4xM2.5 nuts
- 50x5mm steel rod
- can of black spraypaint
- fork-light-barrier sensor
- Arduino Uno
- rotary-encoder wth switch
- 16x2 LCD Display
- M3/M4 maggot screw
- 3x 10k Ohm Resistors
- switching transistor
- 3.5mm audio jack
- wiring, prototyping boards, etc.
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.