Samsung BN63-06813A Remote Control Battery Lid
A replacement battery lid for Samsung TV remote controls (BN63-06813A and others)For your home
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
A replacement battery lid for Samsung TV remote controls.
This design was made for type BN63-06813A, but it should fit many other types of Samsung remotes.
The Sketchup drawing is included and contains separate components for the lid and the clip, which can optionally be printed in two parts and then glued together for the best combination of strength and finish.
There is also a version of the lid with and without a countersunk screw hole, for preventing small kids from opening the lid (if your remote has the matching hole underneath).
Materials and methods
The original part is made of ABS, but PLA will also work fine, although it’s a bit stiffer.
Good results with Cura settings: Fast print (0.15mm), dense infill (50%) and a 0.4mm nozzle.
When printed in one piece, the cover should be printed sideways with a brim (build plate adhesion) and support structure enabled. This will give the strongest results, but not a perfectly smooth surface finish.
In two pieces the lid can be printed flat without any brim or support for a smooth bottom surface finish and the clip part has to be printed sideways to retain strength. The two parts can be glued together seamlessly.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.