Thanks for downloading!
We'd love to hear from you if the print was successful.
Selective pet doorstop
We needed to prevent our dog from entering the room where the cat litter and food is located. So I built a doorstop that firmly keeps the door open so that the cats can pass, but the dog not, even when she pushes with all her force.
For your home
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
I wanted this doorstop to not alter the door, nor the frame, nor have to drill holes in the walls. It also had to be easily removable and put back into place.
Obviously this is tailored for our door and pets, but it might be helpful as a starting point for other people in the same situation. I included the Moment Of Inspiration source file so that it can easily be customized.
Materials and methods
Very easy to print, just make sure that the flat side lies down on the printer bed, no support needed. You will most certainly have to adopt the design for your door and the opening that you require.
I printed this on an Ultimaker 2 with 0.1mm layer height, 50 mm/s print speed and 25% fill density.
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
