Thanks for downloading!
We'd love to hear from you if the print was successful.
Solar Fan Hat
Designed to fit the hardware from Amazon item "KingBra Summer Sport Outdoor Hat Cap with Solar Sun Power Cool Fan for Cycling "
Gadget
Creative Commons Public Domain Dedication
All rights to this work are waived and you can use it however you please.
Attribution
https://smile.amazon.com/gp/product/B075GMQYT7
Description
After 3d scanning a hat with Photogrammety (used my cell phone + AGI Metashapes) I designed this in Rhino 6. I placed patterned tape on the hat face during the photo process, to give the algorithm more pattern match points.
Materials and methods
I chose to solder new wires, and place heat shrink tubing. This is not required, there should be ample room for the excess wire, underneath the fan inlet cowling.
I also chose to paint the fan black, so it does not draw more attention. It is barely visible inside the inlet cowling.
___________________________
Must be printed with supports. Print in material which will not soften under direct sunlight (I chose PETg).
The included Gcode file is:
* Prusa MK3/S Firmware version 3.7.2
* Temps for PET/PETg
* 0.15 Speed profile, 150 travel, 50 perimeter
* Supports from Build Plate with Z contact of 0.15mm
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
