This is my improved Design of my old and basic Spoolholder Design.<br>Now it is featuring:<br> -a more sturdy design <br> - Ballbearings for the Spools (recommended but not absolutely needed to be usable)<br> -Fanholder for a 80mm Fan for the Feeder Stepper Motor/s (The Fanholder is supposed to be glued in or welded<br> - Material feeding in the natural curvature of the filament<br> - Holders for the Motor in case you want to disassemble the feeder<br> - Spool Covers so that the filament cannot unspool that far by itself and get off the spool<br>Recommended:<br>3.2mm Shell and 3mm Top/Bottom thickness with 24% infill for the Spoolholder.<br>Rest with 1.2mm Shell and 1.2mm Top/bottom thickness and 24% infill<br><br>Printlist for the complete Set<br><br>1xSpoolholder<br>1xFeederholder<br>2xSpacer big<br>4xSpacer small<br>1x Feeder fix<br>2x Spool fix<br>1x Fanholder<br>2x Spool Covers<br><br>And as always.... Constructed for PLA print.... should be print and usable with ABS too though.<br><br><br>Update 1: Added Spool Covers
Creative Commons Attribution Noncommercial Share Alike
