Thanks for downloading!
We'd love to hear from you if the print was successful.
Superman Logo Pendant
A Superman Pendant.Fashion
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
- Printed on:
- Ultimaker - The Ultimaker 2
- Great result!
- http://youtu.be/oiNLQIG6ScQ Printed at scale, layer height 0.2 mm, 50 mm/s, 100% infill, 220c on nozzle, 60c on the bed, fan at 100% from 0,5mm up. As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold) But beware!!! Do NOT use much hairspray with this filament! Maybe not at all(on heated bed)! It stuck to my build plate like hell!! On the plus side there's no way this will ever come loose during a print ;-) My first attempt with Bronzefill, and i am satisfied. It feels great! Very heavy and has a real hi-quality feel. Using a Dremel to polish this material is not recommended! Even at the slowest speed with a very soft tool it digs down and creates an ugly surface! The green stuff helped but not enough, i don't know if it's even for that... I haven't tried any bronze polishing products yet.