×Read this message from Erik, founder of YouMagine

T Ford TT truck 1919 scale 1:22 designed by Ed-sept7

T Ford classic truck 1919


    Creative Commons Attribution Share Alike

    Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

    Learn more or download attribution tags


    T Ford ClassicTruck 1919 Scale 1:22 designed by Ed-sept7. There are more of these models to come and they are fun projects to print out and build.

    The hoses on both sides of the truck are made of a 1.75mm piece of filement
    Lots of printing fun.

    Materials and methods

    Printer: CR10S PRO and CR20pro
    Rafts: Yes
    Supports: Yes
    Resolution: Dynamic
    Infill: 50% line
    Filament brand: 205
    Filament material: PLA



    Issues are used to track todos, bugs or requests. To get started, you could create an issue.


    Mini profielfotoEd van der Heijden commented ago

    hi, you did this very well. I hope all parts fit well. grts, Ed.

    Mini cara agustinAgustin Vargas printed this ago
    Carousel thumb win 20220410 12 53 16 pro  2
    Printed on:
    Creality Ender-3
    Nice model with many details
    You can say what colors do you use in the model
    1648a0f959418ed8a67e4494215a3dd4?default=blank&size=40Kevinthefixer printed this ago
    Carousel thumb 20220328 111247
    Printed on:
    Ender 3 Pro
    As advertised, fun model to build; a lot of work, though, lots of fine detail and tight tolerances. Holds some memories for me, though, as a teen I had the pleasure of driving one of these: a machine shop owner had just restored it and made the mistake of telling me I could drive it if I could start it! He was dumbfounded when I retarded the spark and flicked the ignition switch, and quite relieved when I brought it back in one piece. I'm not sure what I'll do with it now I've built it but it does bring that memory back, so thanks Ed! Should anyone else be so ignorant as to not understand any language beside English, I took the time to muddle through a rough translation. Ed, (or anyone else) feel free to correct it and/or include it with other models: Part Name Translation Opbouw - bed Romp - body Zijplanken - stake sides Band - tire Bank - seat Chassis - chassis !! Dak - roof DB kast - glove box Ford - Ford logo Gas - floor pedals Handrem - hand levers Koffer_groot - toolbox Koffer_kl - toolbox Mat - mat Oliekan - oil can Olielamp - oil lamp Radiator - radiator!! Radiator_dop - radiator cap Radiator_V - radiator front Sier_dop - hub cap SpatbordA - Rear fenders SpatbordV - Front fenders-running boards Spiegel - mirror Stuur - steering wheel Toeter - horn Velg - wheel or rim Voorlampen - headlight Voorruit - windshield Zwengel - crank Treeplank - footboards I found it easiest to use 1.5mm brass rod for the axles, but then I already had some rod and a drill bit that size. 2mm would work as well or better.
    Had a bit of trouble with the windshield; I could not figure out a good way to hold it upright while the glue dried. I thought I'd finally figured it, let it dry overnight, and it leaned back about 15deg. I just let it stay, rather than break it and try again. Were I a modeler I'd put some pins on the windshield and some sockets in the body. Aside from all that, a beautiful model, a fun project, and I thank you very much!
    Mini profielfotoEd van der Heijden published this design ago