<p>Works up to a wall thickness around 5mm.</p><p>Print it with "touching buildplate"-support.<br>Drill a 75mm hole, place a drop silicon oil on the thread, insert the thermo-hygrometer into the main part (called "aufnahme"), screw the lid ("blende") on it, place it in the hole, screw the nut ("mutter") from the back to fix the hygrometer.</p><p>The thread is non-standard (2.2mm pitch, 45° angle) - easier to print than ISO/ANSI/.... </p>
Creative Commons Attribution Noncommercial Share Alike
