Tough Belt Clip

A GT2 belt clip that is compact, no-slip, lightweight, tough and easy to tension

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Description

    This piece can be used to close GT2 belts or attach belts to fixed points that take an M3 screw.
    The tension can be adjusted one tooth at a time, to adjust first loosen the M3 screw, pull the belt from the free end then tighten the screw back.
     Can be tightened with M3 screws or even zip ties if the weight is an issue (even with zip ties it will still retain its no-slip property).
      Hint: the part is designed for 6mm wide belts, if your belt is different try scaling in the Z-axis accordingly.

Materials and methods

Additional parts needed:
* Option 1 (total weight 4 grams): 1x M3 screw (12mm or more) and 1x M3 nut.
* Option 2 (total weight 2 grams): 2x small zip-ties.

Documents

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

19058bd73fcdd07df955f84cb1c47e37?default=blank&size=40sapimen added this to the teste collection ago
Bb1b0b442dfad34c204904a9364c4e39?default=blank&size=40Chainlink added this to the 3d printer parts collection ago
Aa4fa0fd0aa8b144b0440d76d2b1c330?default=blank&size=40IA-Flyer added this to the Printer Parts & Tests collection ago
Mini bazingaMarius G published this design ago