Toyota 86, Subaru BRZ, Scion FR-S Coin Holder Console Tray

Center Console Coin Holder Organizer Tray for Toyota 86, Subaru BRZ, Scion FR-S

Maker/DIY

Creative Commons Attribution Noncommercial No Derivatives

Commercial use is not allowed nor can you remix or change this work & you have to attribute the creator.

Learn more or download attribution tags

Description

This is a removable center console coin holder/organizer tray for the Toyota 86, Subaru BRZ, and Scion FR-S. The stock cup holders inside a covered armrest were useless to me so I invented this. It uses a commercial coin holder that fits in grooves for easy removal. The model is Custom Accessories 91116 Coin Holder, and costs a little over $5 on Amazon.

I printed it with PETG on a UM 2+ using a .06 nozzle and a print speed of 50 mm/s. I then painted the parts with one coat of filler primer and 4 or 5 coats of Plasti Dip. This comes out very tacky, so I sprinkled talcum powder over the whole thing and rinsed it off. This makes it much less sticky and much more 'rubbery'.

I made it with a frame to maximize the storage space after experimenting with various types of trays. It also used a lot less plastic and was much easier to print. The parts are all cut up for easy FDM printing.

When using PETG or ABS, glue the parts together with IPS Weld-On 3 Acrylic Plastic Cement available on Amazon or most hobby shops. This water thin cement will melt and fuse the plastic together.

Obviously you do not want to glue the tray to the frame, but I thought I'd mention that just in case. ;) Just glue the frame together, then the tray rim to the tray. The frame has little detents to help line up the posts. Note the position in the rendered images.

Materials and methods

Print with PETG .060 nozzle at 50 mm/s for a relatively quick and painless job. ABS will need a brim to prevent the tray from warping. Use 100% infill.

Documents

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

242a07b08f6062961c51f486e8186aad?default=blank&size=40microdev published this design ago