<i>Edit 22/2: Added some more printer specifications and the .obj, .max & .3ds files</i><br><br>This is a 3d-model for little treasure chest or for any other type of chest you'd like.<br><br>This chest comes with a fully working hinge and can be printed in one go. <br><br><b>Printing specifications</b><br>- This model has been successfully printed with an Ultimaker with a v1 extrusion head. You won't need to use retraction. <br>- Minimum print-size is 40% of the supplied model. Smaller than that and the hinges no longer work. <br>- Sadly enough you will need to use an infill of 5%. We're still working around this issue. If you don't use infill, you get something like the last picture.<br>- We recommend printing with a wall thickness of 1.2mm.<br>- Z-resolution at 0.1m<br>- Everything else just the default ultimaker setup. <br>- No support is needed. Rafting might be an option if you wish to have the bottom side to look less flat.<br>- Heated bed is recommended only for aesthetic purposes. Warping won't affect functionality.<br><br><b>Aftercare</b><br>When
trying to make the hinges work, be sure to remove any excess material.
Force it a little but not too much. Use a bit of love.<br><br>If you'd like a custom crest on your chest, we can provide you one for a small fee.
Creative Commons Attribution Noncommercial Share Alike