Thanks for downloading!
We'd love to hear from you if the print was successful.
Ultimaker original - modular printhead for E3d v6 + Bltouch
Mount for E3d and Bltouch auto bed leveling sensor based on foehnstrums modular printhead3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Yet another modular mount based on foehnstrums modular printhead(https://www.youmagine.com/designs/ulitimaker-orig-modular-printhead-merlin-ubis). The main part that connects to the two rods is slightly modified (includes 3 holes for mounting the thermocouple sensor board and the fan mount). This model differs from Juan Pedrazas(https://www.youmagine.com/designs/foehnsturms-modular-printhead-e3dv6-adapter) by having a larger Z-clearance and includes a mount for a BL touch/3dTouch auto bed leveling sensor. I used Onshape to design the model and it can be viewed
here:(https://cad.onshape.com/documents/104f38f231c8872d87d22f83/w/b34b3b45ba42e8bcd2434894/e/fff98660bd198ffe0db77dac). The fan mount uses the fans from Rais e3d mount (https://www.youmagine.com/designs/e3d-v6-hot-end-mount)
Important! You will need a piece of tube with a inner diameter large enough to contain the PTFE tube and a outer diameter of max. 12.5 mm if you ever want to remove the PTFE tubing (filament jamming).
Materials and methods
Please use a filament with a high glass transition temperature (not PLA). I used Colorfabb XT. I had to wrap the 3dtouch sensor in Ceramic Fiber Tape to protect it from the heat.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.