<h1>Ultra Dry Spool Holders</h1>
<b>Designed to hold moisture sensitive filaments, like PVA and Nylon.</b>
<b>Features:</b>
- 3 Versions available, Narrow, Standard and Wide:<p>
-- Narrow: spools from 140 to 210mm outside diameter and width up to 40mm;<br>
-- Standard: spools from 140 to 210mm outside diameter and width up to 70mm;<br>
-- Wide: spools from 140 to 210mm outside diameter and width up to 100mm;<br>
- Ball bearing design;
- Largest printable part only 125 x 125 x 128mm;
- Can handle heavy spools (3.5kg, 5kg);
- Clear windows to check and measure remaining filament;
- Blue silica holder with inspection window;
- All parts designed to be printed without supports;
- Included detailed assembly instructions;
(project #300417 - G.Calin - gcalin@uol.com.br - May/2017)
<h2>Alternative parts - Base and Cover for large bed printers</h2>
For those with large bed printer (250x250mm), the base and cover are now available in a single piece:
- <b>PAR300417-103_104-{version} - Base AB (ALTERNATE 3D Print x1).STL</b>
- <b>PAR300417-105_106-{version} - Cover AB (ALTERNATE 3D Print x1).STL</b>
These parts do not have the mounting pillars and can be printed in a single run, making assembly faster and easier.
<h2>Alternative roller</h2>
An additional roller is available:
- <b>PAR300417-024-{version} - Conic support roll BODY (3D Print x4).STL</b>
- <b>PAR300417-025-{version} - Conic support roll PIN (3D Print x2).STL</b>
Creative Commons Attribution Noncommercial Share Alike
