Thanks for downloading!
We'd love to hear from you if the print was successful.
UM2 Extended DXF file
I changed the UM2 design and increase the height to be 526mm outside (465mm internal).Maker/DIY
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
The design I tried to keep as close to the normal files as possible using the same mechanics and only changed the height to give a taller print volume.
I included the DXF file as well as the Asipre file I used to cut on my CNC router. I used a 3mm endmill with a 6mm MDF sheet
Should you use the Aspire file, please note I did set the reference point to be the bottom of the wood sheet and not the top. The reason for this is because I zero my CNC always on the top of my spoil board, giving me a fixed reference point regardless the thickness of my wood/material I use.
Materials and methods
Z-Axis rods is 470mm long
The Z-Axis motor shaft is 460mm long
All other parts I kept standard.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.