Thanks for downloading!
We'd love to hear from you if the print was successful.
Universal Bike Pump Mount
A mount to attach a pump to a bicycle frame.Gadget
Creative Commons Attribution Noncommercial No Derivatives
Commercial use is not allowed nor can you remix or change this work & you have to attribute the creator.
This pump holder should clamp to any bicycle so long as the frame cross section is circular. It should also hold any diameter pump. You will probably need two clamps to hold the pump securely.
You will need:-
M4x20mm bolts (2)
M4x12mm bolts (1)
M4 nuts (3)
cable tidy straps (2) - See link below.
Fit the straps to the mount as shown in the images with the 12mm long bolt and a nut. Then attach to the bicycle with the 20mm long bolts and nuts.
You may need to trim the straps to the correct length.
Materials and methods
Printer: Ender 3
Resolution: 0.20 mm
Nozzle Temp: 240°
Bed Temp: 70°
Top Layers: 4
Bottom Layers: 4
You will need supports for the pump mount section of the assembly. Please orientate it as shown in the print bed image for best results.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.