Thanks for downloading!
We'd love to hear from you if the print was successful.
USB Microscope Stand
for model F210 (Dodocool)Maker/DIY
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This design uses the original base plate of the microscope. But you can also use your own base plate.
Suitable for a 1/2 inch adjustable coolant hose with 10 elements. The ball joints of the hose have a diameter of 20.6 mm. The orange colored adapter has a thread with 20.2 mm diameter and 1.75 mm pitch. https://www.ebay.de/itm/131645165839
When tightening the plastic screw, counterhold with a 3mm Allen key.
The clamp is not symmetrical, so do not mount it overhead.
One M6 x 15 mm - M6 x 25 mm countersunk screw
Two M3 x 30 mm cylinder head hexagon socket screws
Two M3 x 10 mm cylinder head hexagon socket screws
Four nuts M3
Materials and methods
PLA, 0.2 mm layer height, no supports required
Design: DesignSpark Mechanical
Issues are used to track todos, bugs or requests. To get started, you could create an issue.