Thanks for downloading!
We'd love to hear from you if the print was successful.
[V2] Cycling Computer Mounting Bracket
[V2] Cycling Computer Mounting BracketGadget
Creative Commons Attribution Noncommercial No Derivatives
Commercial use is not allowed nor can you remix or change this work & you have to attribute the creator.
This updated version of my cycling computer mount allows you to place your cycling computer in line and in front of your stem. Instead of using the provided rubber band, I glued the mount that came with the cycling computer in place using some two-part epoxy. Note that your cycling computer mount must be a 33mm octagon (from one flat side to the opposing flat side), otherwise this mount won't work.
Compatible with a standard 31.8mm handlebar. A link for the specific cycling computer I use, can be found below. Other cycling computers with a similar mounting mechanism will most likely work just fine too. Besides the two-part epoxy, you'll need a short M3 screw (around 6mm) and M3 nut for assembly.
If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link (https://bit.ly/2XYWpHW) when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)
This post contains affiliate links
Materials and methods
Issues are used to track todos, bugs or requests. To get started, you could create an issue.