Thanks for downloading!
We'd love to hear from you if the print was successful.
[V2] Max Verstappen RB14 Scale Model Stand
[V2] Max Verstappen RB14 Scale Model StandMiniatures
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This is an updated version of: https://www.thingiverse.com/thing:3142350
What's new about this model, is the angle of the model support legs. With this change, the model is much more stable. Furthermore, the base now has rounded edges instead of chamfers. Finally, there are four small circular indents on the bottom of the stand.
You can place magnets or a grippy material in these, to increase the stability even more.
I would suggest printing the base with a 10% infill and the support legs with 100% infill, which increases the strength and durability. For Cura users, this can be done by placing
a support blocker and using per model settings.
If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link (https://bit.ly/2XYWpHW) when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)
Materials and methods
10% and 100%
Make sure the retraction settings on your printer are correct, as the legs will otherwise
cause a lot of stringing.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.