This a watch that I have created in order to reuse an old watch mechanism I had.
The glass used for this design has a diameter of 30.5 mm and a thickness of 1.36 mm.
Instructions for assemble it:
For the joints between the differents parts of the chain you will need 1.75mm width * 19.3mm long pieces of cable (I used 3D filament for this). And then glue them to exterior parts.
I will try to create more chains and cases for the watch so they can be interchanged and you have the Fusion file if you want to adjust it yourself.
Creative Commons Attribution Noncommercial Share Alike