Wood style floor spooler for Ø 200mm x 65-80mm spools

Alternative spooler in wood style design

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


Based on original design: Wood style floor spooler for 300mm spool (2.3kg) by DING [Done IN Garage]


This spooler arises from a mistake.. yep!
When I installed a release 2.4 of Cura, and slicing main parts, I didn't pay attention about the message of auto scaling and I launched the printing process, so at the finish I discovered the surprise :)

I didn't give up and I have drawn the rest of the parts with the same scale and this spooler came out that I consider a remix of: https://www.youmagine.com/designs/wood-style-floor-spooler-for-300mm-spool-2-3kg

Print it with a wood PLA for a good finishing, the smell, the shape and mounting will feel you like a carpenter!
I used a wood PLA for visible parts, for bearing hubs I used a normal PLA with fine print definition. TPU filament for floor dot.

Materials and methods

How I printed the parts:

SIDE: nozzle 0.8, layers 0.25, unfill 20%
CENTRAL: nozzle 0.6, layers 0.15, unfill 30%
FIXERS: (A and B): nozzle 0.4, layers 0.1, unfill 50%
HUBS: nozzle 0.25, layers 0.06, solid
DOTS: nozzle 0.25, layers 0.06 solid

- Bearing 619/6: 8pcs
- Screw Phillips 3.5x19: 4pcs



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


Mini crispr3DING [Done IN Garage] published this design ago