This feeder designs combines the two existing feeder designs from |Robert| and Geeks:<br><br>- <a href="https://www.youmagine.com/designs/alternative-um2-feeder-version-two" rel="nofollow" target="_blank">https://www.youmagine.com/designs/alternative-um2-feeder-version-two</a><br>- <a href="https://www.youmagine.com/designs/extruder-um2-version-2" rel="nofollow" target="_blank">https://www.youmagine.com/designs/extruder-um2-version-2</a><br><br>- Body and latch by |Robert|<br>- Filament guide and knurled wheel for tension setting by Geeks<br><br><br>This design erases the need for additional filament guides for Roberts Feeder and allows an easy adjustment of the spring tension without allen key.<br><br>For assembly instructions see the original |Robert| design: https://www.youmagine.com/designs/alternative-um2-feeder-version-two#!design-information<br><br>Additional assembly:<br><br>- assemble the yoke at the body arm with the M3x35 screw and mount the knurled wheel with the M3 nut behind the spring with the washers<br><br>- assemble the two wheels with 2x M3x10 screws
Creative Commons Attribution Noncommercial Share Alike
