×Read this message from Erik, founder of YouMagine
De90ad97a065677ec0ea94b8dccd73f0?default=blank&size=170

Edvardas

  • Joined on Oct 01, 2013
  • Lithuania
  • 32 times favorited
  • 7,717 times downloaded

Activity

Commented on PROTOTYPE: Heated bed mosfet relay V3 over 5 years ago
When you think you can post updated design? I really love the idea of isolating printer from heated bed.
Commented on PROTOTYPE: Heated bed mosfet relay V3 over 5 years ago
Yay... I've tested this few weeks ago and got some smoke instantly, now there's a short in first diode and after reading this i'm no longer sure that it was my fault. Haven't noticed a flaw in design...
Published UMO compatible friction less spool holder almost 7 years ago
Commented on 3D printable quadcopter about 7 years ago
<p>Glad to hear that :)&nbsp;</p><p>I will try 1045 props as well. Thanks for the update!</p><p>What battery do you use and what's you flight time? I have a 2200 mAh battery and it takes about 5-7 mins to discharge it completely.</p>
Commented on 3D printable quadcopter about 7 years ago
<p>I'm not too successful in tuning either.. I believe that you must finetune PIDs for your quad anyway. Mine also isn't stable enough in the air, i think my remote is not good enough for it and stick in mid position gives some floating.. Since first step is to trim your remote, so it wouldn't drift when hovering. my PIDs are for R/P/Y 8.3/0.015/20.&nbsp;</p><p>Anyway it looks to me that multiwii is not so user friendly and requires skill to tune everything correctly. Keep trying and you will make it!</p>
Commented on 3D printable quadcopter over 7 years ago
<p>Good :) Enjoy your drone!</p><p>Though i recommend of using braces for the legs (plywood that i've used or something similar), without this brace, my legs would broke almost on every hard landing, but these braces really makes a big difference.&nbsp;</p>
Commented on 3D printable quadcopter over 7 years ago
<p>Frame is pretty stiff. I designed it be like this. This is my v5 quad. I use 930kV motors and 8045 cheap ebay propelers.&nbsp;</p><p>Frame is stiff, but won't last if you do a heavy crash to the ground. so be careful. That's what i've painfully learned..</p>
Updated 3D printable quadcopter over 7 years ago
Updated 3D printable quadcopter over 7 years ago
Published 3D printable quadcopter over 7 years ago