Commented on Einstein over 7 years ago
I tried to upload the complete model here but it fails, so I added it to http://www.thingiverse.com/thing:1444970 . You can download the file Einstein_bust_300.stl , this is the complete model. Enjoy printing the model!
Updated Einstein over 7 years ago
Published Einstein over 7 years ago
Updated Nefertiti over 7 years ago
Published Nefertiti over 7 years ago
Contributed on Nefertiti - in sections up for 3D printing full sized over 7 years ago
- Printed on:
- RepRap Prusa i3 - self-sourced/built
- I had to cut the model into 11 pieces so it fitted my 3dprinterlab.org standard Prusa i3 (200 X 200 Y 220 Z build space), printed with a 0.4 mm nozzle. After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the model very lightly to preserve the 3d printer artifacts. Finally I gave the model 3 coats of golden spray paint.
Favored Nefertiti - in sections up for 3D printing full sized almost 8 years ago
Followed Richard Horne almost 8 years ago
Favored The elephant - Fan Duct & Mount for prusa i2 x-carriage about 8 years ago
Followed Thomas Sanladerer about 8 years ago
Favored Y Axis Endstop Clamp for Prusa I3 with 8mm Rods - Split about 8 years ago