C56bb8a7a01df4e38fc1e58135de6d23?default=blank&size=170

JustKrys

  • Joined on Mar 21, 2015
  • Unknown
  • 167 times favorited
  • 16,824 times downloaded

Activity

Favored Dovetailed Mounting System over 4 years ago
Commented on Ultimaker Cross rotary knob over 4 years ago
This is hilarious! Love it! :D
Contributed on UM2(+) filament spool side hanger with UM connector over 4 years ago
Carousel thumb mk2 69 connyg spool holder 2
Printed on:
Ultimaker - The Ultimaker 2
Result:
Works really well! Top clip is a bit tight, but otherwise a great and strong spool holder. :)
Contributed on UM2(+) filament spool side hanger with UM connector over 4 years ago
Carousel thumb mk2 69 connyg spool holder 2
Printed on:
Ultimaker - The Ultimaker 2
Result:
Works really well! Top clip is a bit tight, but otherwise a great and strong spool holder. :)
Commented on OpenSCAD Metric Nut, Bolt & Threads Library about 5 years ago
Small note: For ABS (and maybe PLA too), scale nuts up by about 2% else they are quite tight.
Commented on UM2 Build Plate Stabilizer over 5 years ago
I suspect the units are inches. So scale by 2540 % to get proper mm size. I have not tested this yet though.
Favored UM2 minimalist front panel about 6 years ago
Favored Déflecteur UM2 about 6 years ago
Favored Feeder Snap-On Guide with Oiler over 6 years ago
Commented on Cutlery basket over 6 years ago
<p>Hi!&nbsp; Nice design.</p><p>How many shells did you use for the walls to make sure it was strong enough?</p><p>Thanks! :)</p>
Commented on Wire Retainer Clip 1 over 6 years ago
Yeah, I am still getting a bit of pillowing with the UM Silver PLA that came with my printer. I have read the troubleshooting guide you linked. I just have not yet systematically worked on solving it. I do not have the issue with my other filaments, and I read that grey (and I assume by extension silver) is harder to get right than other colours. The UM silver seems to need 215 C for good adhesion and to prevent under extrusion. I think the higher temp is part on the issue. Also, for my UM2 uogrades, I have pretty much been sticking to the Normal quick profile for ease and consistency, but it seems it is not perfect either. Anyway, that is where I am at with that issue. I need to just look into it more systematically and let go of the training wheels (quick profiles). :) I am certainly open to any wisdom you might like to share. :D Thanks for the help!
Contributed on Wire Retainer Clip over 6 years ago
Carousel thumb wire retainer clip 1
Printed on:
Ultimaker - The Ultimaker 2
Result:
Excellent on second attempt.
Feedback:
Rotated to print sideways and doubled to print two of them. Since they are thin, one came loose on the first attempt. I needed to apply fresh glue stick and on the second attempt everything worked great. Such a great idea! :)
Favored Wire Retainer Clip over 6 years ago
Commented on Mod to lRobertl feeder enhancement Yoke over 6 years ago
<p>Hi Izzy,</p><p>Thanks for posting the Wire Retainer Clip, as requested. :)</p>