×Read this message from Erik, founder of YouMagine
Bc7a9b852e941e18c88bf7548d77f643?default=blank&size=170

Laz Davila

  • Joined on May 20, 2022
  • Unknown

Activity

Contributed on Nozzle torque wrench about 1 month ago
Carousel thumb 20220521 010902430 ios
Printed on:
Creality Ender-3
Result:
Great result! Printed with Comgrow Creality PLA 1.75mm / sliced with Cura 5 / 0.2mm height, 0.4mm line width, 100% infill (rotors) @200deg C
Feedback:
Thanks for this - quite very well thought out design. For others' reference - Calibrated using the wrench+scale method, and after averaging several measurements and accounting for sources of error, I calculated this wrench achieves: 1.3 Nm +/- 10%