Span2 youtube

Kjell Olav Forberg

  • Ultimaker 2
    Utm2 small

    Ultimaker 2

    Multimaker main printer

Activity

Contributed on Olsen block box about 4 years ago
Carousel thumb dsc 1249
Printed on:
Ultimaker - The Ultimaker 2
Result:
Good result, could have had a little better clearances. Holes were a little to thight but not by much.
Feedback:
Used woodfill with 0.8 nozzle. http://youtu.be/_fUsvdcqAC4
Contributed on Nozzle torque wrench about 4 years ago
Carousel thumb dsc 1194
Printed on:
Ultimaker - The Ultimaker 2
Result:
Printed beautifully!
Contributed on Hollow question block about 4 years ago
Carousel thumb youtube
Printed on:
Ultimaker - The Ultimaker 2
Result:
Great result, printed absolutely perfect!
Feedback:
Printed at 2x scale, layer height 0.1 mm, 50 mm/s, 6% infill, 220c on nozzle, 60c on the bed, fan at 100% from 0,5mm up. ColorFabb Signal Yellow filament. https://youtu.be/F7Qr2hbVXZk As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold) Printed almost 100% perfectly! Looks super clean and sharp! Only issue is some scars on the top. Very easy to print.
Contributed on UM2 Dual Fan Shroud over 4 years ago
Carousel thumb youtube
Printed on:
Ultimaker - The Ultimaker 2
Result:
Good print, no problems mounting. But i need to print again in a more temperature resistant filament! It's warping on me :-/
Favored Ultimaker 2 Fan Shroud over 4 years ago
Favored Nozzle torque wrench over 4 years ago
Contributed on Superman Logo Pendant over 4 years ago
Carousel thumb youtube
Printed on:
Ultimaker - The Ultimaker 2
Result:
Great result!
Feedback:
http://youtu.be/oiNLQIG6ScQ Printed at scale, layer height 0.2 mm, 50 mm/s, 100% infill, 220c on nozzle, 60c on the bed, fan at 100% from 0,5mm up. As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold) But beware!!! Do NOT use much hairspray with this filament! Maybe not at all(on heated bed)! It stuck to my build plate like hell!! On the plus side there's no way this will ever come loose during a print ;-) My first attempt with Bronzefill, and i am satisfied. It feels great! Very heavy and has a real hi-quality feel. Using a Dremel to polish this material is not recommended! Even at the slowest speed with a very soft tool it digs down and creates an ugly surface! The green stuff helped but not enough, i don't know if it's even for that... I haven't tried any bronze polishing products yet.
Contributed on Elsa's tiara remixed over 4 years ago
Carousel thumb dsc 0773
Printed on:
Ultimaker - The Ultimaker 2
Result:
Great result!
Feedback:
Printed at scale, layer height 0.1 mm, 50 mm/s, 35% infill, 220c on nozzle, 60c on the bed, fan at 100% from 0,5mm up. I printed this for my daughter and her friend and they loved them but they thought it was a little tight on the head, they are 6 years old. But it printed very nicely with no issues!
Contributed on Star Wars - AT-ST Scout Walker over 4 years ago
Carousel thumb youtube
Printed on:
Ultimaker - The Ultimaker 2
Result:
Great result!
Feedback:
AT-ST: Printed at scale, layer height 0.1 mm, 50 mm/s, 20% infill. Base: Printed at scale, layer height 0.2mm, 80 mm/s, 5% infill. Both: 220c on nozzle, 60c on the bed, fan at 100% from 0,5mm up. http://youtu.be/UQ_eUouWrBA Awesome model, looks really cool! I spent a good deal of time placing the pieces in cura, since not all the pieces were orientated the way i wanted them. I got away with everything on 2 buildplates and everything came out OK to GREAT. Assembly was a bit of a pain but not to bad, there are holes in some of the joints which you can fill with filament(3mm) to strengthen and align with. I used superglue to adhere the pieces, and that worked great. Unfortunately the model did not stand on its own, maybe i could have balanced it better when i assembled it but i dont know. Instead i just designed and printed a BASE and just glued it to that! Looks pretty good IMO :-)
Favored Batman over 4 years ago
Favored Panther at the Beach over 4 years ago
Favored Bike Brand KeyChain Trek almost 5 years ago
Favored Drain Screen almost 5 years ago
Favored Digger earrings almost 5 years ago
Favored Printable tetris almost 5 years ago
Favored Zip tie GoPro mount almost 5 years ago
Favored Ultimaker2 Knob almost 5 years ago