Dd1deedec168cac2f800090c7efbfea9?default=blank&size=170

race_ban9

  • Joined on Mar 27, 2016
  • Unknown

Activity

Contributed on Star Wars Lightsaber (Complex version) about 5 years ago
Carousel thumb 30df3773 12cf 416e adc6 720a6247fc64 zps6iu3t7da 1
Printed on:
Makerfarm - Prusa 8 "i3 Kit
Result:
Some trial and error on Material and temperatures. Never got ABS to print the clamp or Riflegrenade without separating. Reprinted those in ABS and used the revised pin/switch and it turned out really well for a first try by a rank beginner. All printed at .12 layers normal speed so it has some artifacts and blobs. Will be reprinting entire thing in gray,black, and bronze/gold abs at much lower speeds for one to detail and weather.
Feedback:
Thanks for the awesome design!
Contributed on Light saber Pin and Switch revision about 5 years ago
Carousel thumb 30df3773 12cf 416e adc6 720a6247fc64 zps6iu3t7da 1
Printed on:
Makerfarm - Prusa 8 "i3 Kit
Result:
Printed on a MakerFarm Prusa i3v 12" (not listed). .12 layer height in PLA Works flawlessly. We tried the one included with the complex saber design in both ABS and PLA with no success. No problem with this one as long as the print speed is pretty slow.
Feedback:
Thanks!