Ultra Dry Spool Holders

Ultra Dry Spool Holders

Designed to hold moisture sensitive filaments, like PVA and Nylon.

Features:

• 3 Versions available, Narrow, Standard and Wide:

  -- Narrow: spools from 140 to 210mm outside diameter and width up to 40mm;
  -- Standard: spools from 140 to 210mm outside diameter and width up to 70mm;
  -- Wide: spools from 140 to 210mm outside diameter and width up to 100mm;
  

• Ball bearing design;
• Largest printable part only 125 x 125 x 128mm;
• Can handle heavy spools (3.5kg, 5kg);
• Clear windows to check and measure remaining filament;
• Blue silica holder with inspection window;
• All parts designed to be printed without supports;
• Included detailed assembly instructions;

(project #300417 - G.Calin - gcalin@uol.com.br - May/2017)

Alternative parts - Base and Cover for large bed printers

For those with large bed printer (250x250mm), the base and cover are now available in a single piece:

• PAR300417-103_104-{version} - Base AB (ALTERNATE 3D Print x1).STL
• PAR300417-105_106-{version} - Cover AB (ALTERNATE 3D Print x1).STL

These parts do not have the mounting pillars and can be printed in a single run, making assembly faster and easier.

Alternative roller

An additional roller is available:

• PAR300417-024-{version} - Conic support roll BODY (3D Print x4).STL
• PAR300417-025-{version} - Conic support roll PIN (3D Print x2).STL