Report inappropriate content

Printrbot Simple Maker's Edition. Complete STL for 1405 !

Looking for the complete STL files of all the Printrbot Simple 1405 wood pieces?  This is it!  

  Printrbot released the lasercut DXF drawing file, but we need STL to be able to print any of those parts.  Nothing can convert non-water-tight drawings into printable stl, so they have to be drawn from scratch. (trace programs didn't work well either.) I bought a copy of  CorelDraw and learned hands on to  draw with it. Since I was drawing a couple parts, I decided to go ahead and draw every single part that is usually made of wood. A hard week well spent..Finally done!  

  The original DXF can be found at  https://www.youmagine.com/designs/printrbot-simple-maker-edition-1405  

  They are drawn specifically for printing, slightly smaller than the originals and all the tabs are drawn slightly smaller that the holes they fit into. It is a nice, tight fit and first layer squish may have to be filed off to fit. Screw and nuts are drawn for the original 3mm hardware to be used.  

  I have no problem fitting parts that are printed at 2 perimeters, 0.4mm nozzle and .25 mm layer height with 30% infill. If you use 3 perimeters or thick layers, you may need to edit the files or do some drilling and sanding to fit the parts. the thickness of the pieces are rendered at 5.6 mm thick. They fit nicely with printrbot's original 6mm wood.  Part 1105-1106 are the same part, so be sure and print 2 of these.
 
Best advice is to print a couple parts and test fit them to achieve final tweaks before printing a large plate of parts.
  It is still a work in progress (I'm a beginner at drawing). If you find an error, Please let me know so I can correct them.  

  It is intended to print every part (largest piece requires a bed 260mm x 103mm) and it works great in my tests, but you may require editing or altering for your needs based on you hardware and settings.  
  A lot of work went into these files so please feel free to alter, edit and share, but also give credit as well.  Enjoy!  
Ed


Update 8/28/2014

Updated part 1107.stl and all-parts.stl to include a missing tab-socket in part 1107.

Your email is used to contact you if we need more information.


Back to design