Report inappropriate content
3D Printed Bike
We have printed the parts with XT-CF20 on an Ultimaker Original Plus with a 0.8 Nozzle and 100% infill.
Print slow (35mm/s) to get good layer bonding.The glue is a really nasty stuff, so we have invented a new glue distribution system. You need a 2k polyurethane glue syringe with a mixing nozzle. After printing the parts you stack them together with all the tubes and push the glue through the inlets between the tubes and the 3D printed parts. The runner system will guide the glue automatically to the right places.
Cad files can be found here:https://grabcad.com/library/xt-cf20-bike-3d-printed-bicycle-1