Span2 avatar

Richard J. Toften

  • Joined on Feb 16, 2016
  • Norway
  • 14 times favorited
  • 2,483 times downloaded
  • Ultimaker 2
    Utm2 small

    Ultimaker 2

    UM2

Activity

Contributed on Fan Mount (UM2 + Olsson block) about 5 years ago
Carousel thumb received 10153450953321722
Printed on:
Ultimaker - The Ultimaker 2
Result:
Excellent result, very happy :)
Feedback:
A little tight fit for the fans, not major, but I had to use the Dremel a bit.
Favored Fan Mount (UM2 + Olsson block) about 5 years ago
Updated UM2 Print head shield about 5 years ago
Favored UM2 spring replacement about 5 years ago
Favored Print Head Cable guide about 5 years ago
Favored Ultimaker 2 Replacement Knob about 5 years ago
Favored Ultimaker2 Cable Chain about 5 years ago
Followed IRobertI about 5 years ago
Updated 74 mm core for iRoberti spoolholder about 5 years ago
Commented on Low friction UM2 spoolholder about 5 years ago
Extended 74mm core and spacer for 608 bearings can now be found here: https://www.youmagine.com/designs/74-mm-core-for-iroberti-spoolholder Thanks for an awesome spoolholder iRoberti :)
Updated 74 mm core for iRoberti spoolholder about 5 years ago
Updated 74 mm core for iRoberti spoolholder about 5 years ago
Published 74 mm core for iRoberti spoolholder about 5 years ago
Published UM2 Print head shield about 5 years ago
Updated Olsson Block tool holder about 5 years ago
Updated Olsson Block tool holder about 5 years ago
Published Olsson Block tool holder about 5 years ago
Contributed on Low friction UM2 spoolholder over 5 years ago
Carousel thumb 1455736289688 784088098
Printed on:
Ultimaker - The Ultimaker 2
Result:
Excellent
Feedback:
I printed the 608 and can confirm it's working out perfect. Just thinking the core could be 70 mm long by default to fit UM spools + up to 20 mm wider spools with some threads left. The big nut threads past the end of the core anyway, so maybe I'll print the 90 mm core and just use that.