Span2 stu the brew  beer in hand

Stu_le_brew

  • Joined on Jul 08, 2014
  • France
  • 1 times favorited
  • 581 times downloaded

Activity

Followed Izzy over 3 years ago
Favored Mixee Bag over 3 years ago
Favored Mixee Wallet over 3 years ago
Followed UltiArjan over 4 years ago
Followed IRobertI over 4 years ago
Commented on Boombox Stand over 5 years ago
I am amassed - it does actually print without support structures on my Ultimaker 2
Commented on Belt Driven Ultimaker 2 Extruder over 5 years ago
I recently printed this feeder and will be trying it soon, I am convinced it will work well particularly with flexible filament. I was able to source the belts via alfa-tech3D.com who are based in Denmark so much easier for shipment than McMaster they provided very good service for me
Favored Ultimaker 2 fan mount - DUAL over 5 years ago
Favored Recreus Sandals over 5 years ago
Favored Belt Driven Ultimaker 2 Extruder over 5 years ago
Commented on Low friction UM2 spoolholder over 5 years ago
My model works with the modified spool from the link above, at each end of the central reel is a fixation that has locates in the groove in my designed stand, it is free standing and not connected directly to the printer, by the way you need two of my designs one each side. <br>So what I am suggesting is to make these stands taller
Commented on Low friction UM2 spoolholder over 5 years ago
I agree its an amassing piece of work, but I am developing a floor based spool mount which uses the core spool centre which maybe could work for you - perhaps made taller ?&nbsp; the link below shows my work so far - hope this helps S<br><br>&nbsp;<a href="https://www.dropbox.com/s/77juuwjj3r4cdki/reel%20holder%20mark3.stl?dl=0" rel="nofollow" target="_blank">https://www.dropbox.com/s/77juuwjj3r4cdki/reel%20holder%20mark3.stl?dl=0</a>
Commented on Low friction UM2 spoolholder over 5 years ago
Hi Zews, you may like to check out <a href="http://www.youmagine.com/designs/3027" rel="nofollow" target="_blank">http://www.youmagine.com/designs/3027</a> its a complete system based on IRobertI's spool holder, I use IRobertI's holder and am very pleased with it too. <br>I have been developing a floor based addition to UltiArjans rail system.
Commented on Compact Low Friction Spool Holder over 5 years ago
Thanks for your reply, I had the shell thickness to 0.6 so that fixes the problem - thanks
Commented on Compact Low Friction Spool Holder over 5 years ago
there seems to be something wrong with the two spacers, I have printed them twice and the smaller diameter part does not print ? I guess it could be a problem with Cura (I am using version 14.07) which does show the spacers with the smaller diameter ?
Published Swiming pool skimmer over 5 years ago