Works great! Had to use two or more cable ties (see picture) because one alone was breaking (the door is pretty heavy).
After a week or two it broke (see picture). I cant remember what print settings I used, but probably standard because. I now reprint it with 4 perimeters, 0,6mm nozzle and a modifier in this area with 50% infill.
Works great! Printed in different colors in PLA. Also used Woodfill and corkfill and worked great, too. Only the overhang on the ring-part doesnt look perfect because it is difficult to print. The mechanism to connect the two parts works really good!
