×Read this message from Erik, founder of YouMagine
Span2 e1a83288 68a1 49d5 b944 89632f1ba41b

Thinkersbluff

  • Joined on Dec 27, 2021
  • Unknown

Activity

Contributed on Ducati 1199 Superbike (Complex) 5 months ago
Carousel thumb 4fe87985 bc97 47cc 8a3a 4a793b92e5cc
Printed on:
Creality Ender-3
Result:
Took me two weeks of research, printing, painting and assembly. Remixed a few parts, for higher fidelity and split a few parts to lay flat, to get past some printing issues. Managed to print everything with a 0.4mm nozzle, at layer heights of 0.12 to 0.2. Found assembly of front wheels and forks to the bike to be the most difficult. Suspect the top shaft holder should be at least 1mm thicker, to give deeper sockets to hold the shafts.
Feedback:
Instructions would be very helpful. I don’t think any of the YouTube “make” videos figured out the right way to assemble the front brakes, for instance.
Commented on Ducati 1199 Superbike (Complex) 6 months ago
The Ultimaker Blog link is broken (Error 404). If there is any other guidance available re: printing and assembly, it would be helpful to post that here as documentation. There are plenty of live review videos on YouTube, as visual references. There are also videos on YouTube by folks who have printed, painted & assembled this model. Links to some of those may be helpful. e.g.: Live Review: https://www.youtube.com/watch?v=m-ja01btI0E Model Assembly: https://youtu.be/5cz84wMxaLI
Favored Ducati Girl 6 months ago
Favored Ducati 1199 Superbike (Complex) 6 months ago